Link Fitting

Yoke Plate (type L)

Yoke Plate (type L)

  • Yoke Plate (type L)

Online Service:

Link fitting is used to connect insulators to the towers and conductors.The forged hardware is mainly made of heat treated steel.This steel is especially suitable for forging and its good performance, especially ductility, is due to the heat treatment process.
 
This is of particular value if dynamic loads, for instance through ice shedding or oscillations, are likely.In particular cases, where at very low temperatures dynamic stresses could occur, hardware made of special steels is available.

Catalog
No.
Dimensions(mm) Rated Failure
load(kN)
Weight
(kg)
B B1 Φ1 Φ2 H L
L-1040 16 - 20 18 70 400 100 4.5
L-1240 16 - 24 18 70 400 120 4.4
L-1640 18 - 26 20 100 400 160 6.2
L-2140 16 26 30 20 100 400 210 5.6
L-2052 16 26 30 26 100 520 200 8
L-2055 16 26 30 24 200 550 200 11.8
L-2540 16 30 33 24 110 400 250 9
L-3040 18 32 39 26 110 400 300 10
L-4255 24 38 45 30 250 550 420 24.4
L-5040 30 38 45 33 110 400 500 14.8
L-6045 32 42 51 39 200 450 600 25.5
L-6050 32 42 51 39 250 500 600 23.3
Catalog
No.
  Dimensions(mm)   Rated Failure
load(kN)
  Weight
(kg)
  B   B1   Φ1   Φ2   H   L
  L-1040 18 26 30 24 120 400 200 11.8
  L-2160 18 26 30 26 120 600 210 11.8
  L-3060 18 32 39 30 140 600 300 16.7
Catalog
No.
  Dimensions(mm)   Rated Failure
load(kN)
  Weight
(kg)
  B   B1   Φ1   Φ2   H   L
  L-1045 16 - 20 20 250 450 100 10.3
  L-1245 16 - 24 20 250 450 120 10.6
  L-1645 18 - 26 20 250 450 160 12
  L-2145 16 26 30 20 250 450 210 11
  L-3045 18 32 39 26 250 450 300 15.1
  L-3050 18 32 39 26 250 500 300 15.5
  L-1645G 18 - 20 20 250 45 160 11.6
  L-2145G 16 26 30 24 250 45 210 11.6
  L-2150GN 20 - 26 26 250 50 210 15.8
  L-3245GN 18 28 33 26 250 45 320 13.6
  L-4250G 20 32 39 26 250 500 420 16.7
  L-5045B 30 40 45 30 200 450 500 15.4
Catalog
No.
  Dimensions(mm)   Rated Failure
load(kN)
  Weight
(kg)
  B   Φ1   Φ2   H   L
  L-7 16 18 18 30 544 70 3.7
  L-3070 30 39 33 160 700 300 22.4

Hot Product

News