Link Fitting

Socket Eye (type W & WS)

Online Service:

Product Description

Link fitting is used to connect insulators to the towers and conductors.The forged hardware is mainly made of heat treated steel.This steel is especially suitable for forging and its good performance, especially ductility, is due to the heat treatment process.

This is of particular value if dynamic loads, for instance through ice shedding or oscillations, are likely.In particular cases, where at very low temperatures dynamic stresses could occur, hardware made of special steels is available.

Catalog No.	Socket IEC code	Dimensions(mm)					Rated Failure load(kN)	Weight (kg)
Catalog No.	Socket IEC code	B	C1	C2	Φ	H	Rated Failure load(kN)	Weight (kg)
W-7A	16	16	19.2	34.5	20	70	70	0.69
W-7B	16	16	19.2	34.5	20	115	70	0.86
W1-10	16	18	19.2	34.5	20	85	100	0.9
W1-12	16	20	19.2	34.5	24	90	120	1.3
W-12	20	20	23	42.5	24	90	120	1.4
W-30	24	32	27.5	51	39	110	300	3.5

Catalog No.	Socket IEC code	Dimensions(mm)					Rated Failure load(kN)	Weight (kg)
Catalog No.	Socket IEC code	B	Φ1	Φ	H1	H	Rated Failure load(kN)	Weight (kg)
W1-7K	XP-7 XP-4.5	20	14	20	70	120	70	1
W1-12K	16	22	14	22	70	120	120	1.3

Catalog No.	Socket IEC code	Dimensions(mm)					Rated Failure load(kN)	Weight (kg)
Catalog No.	Socket IEC code	B	Φ1	Φ	H1	H	Rated Failure load(kN)	Weight (kg)
W1-7R	XP-7 XP-4.5	20	14	20	70	120	70	1
W1-12R	16	22	14	22	70	120	120	1.3

Catalog No.	Socket IEC code	Dimensions(mm)							Rated Failure load(kN)	Weight (kg)
Catalog No.	Socket IEC code	B	C1	C2	Φ1	Φ	H	L	Rated Failure load(kN)	Weight (kg)
WG-0724	XP-7	16	19.2	34.5	20	40	70	24	70	0.8
WG-0732	XP-7	16	19.2	34.5	20	40	70	32	70	0.85
WG-0745	XP-7	16	19.2	34.5	20	40	70	45	70	0.87
WG-1036	XP-10	16	19.2	34.5	21.5	40	85	36	100	0.9
WG-1045	XP-10	16	19.2	34.5	21.5	40	85	45	100	0.93
WG-1050	XP-10	16	19.2	34.5	21.5	40	85	50	100	0.95

Catalog No.	Socket IEC code	Dimensions(mm)					Rated Failure load(kN)	Weight (kg)
Catalog No.	Socket IEC code	C	C1	C2	M	H	Rated Failure load(kN)	Weight (kg)
WS-7	16	18	19.2	34.5	16	70	70	0.97
WS-10	16	20	19.2	34.5	18	85	100	1.7
WS-12	20	24	23	42.5	22	90	120	3.81
WS-12X	16	24	19.2	34.5	22	90	120	3.1
WS-12A	16	20	19.2	34.5	22	85	120	1.8
WS-16	20	26	23	42.5	24	95	160	2.64
WS-20	24	30	27.5	51	27	100	200	4.3
WS-20DF	20	30	23	42.5	27