Link Fitting

U Anchor Shackle

U Anchor Shackle

  • U Anchor Shackle

Online Service:

Link fitting is used to connect insulators to the towers and conductors.The forged hardware is mainly made of heat treated steel.This steel is especially suitable for forging and its good performance, especially ductility, is due to the heat treatment process.
 
This is of particular value if dynamic loads, for instance through ice shedding or oscillations, are likely.In particular cases, where at very low temperatures dynamic stresses could occur, hardware made of special steels is available.

Catalog No. Dimensions(mm) Rated Failure load(kN) Weight (kg)
C D M R H
U-7 20 16 16 22 80 70 0.52
U-10 22 18 18 24 85 100 0.73
U-12 24 20 22 30 90 120 1.01
U-16 26 22 24 32 95 160 1.4
U-21 30 24 27 36 100 210 2.12
U-25 34 26 30 40 110 250 3
U-30 38 30 36 46 130 300 4.33
U-50 44 36 42 55 150 500 7
Catalog No. Dimensions(mm) Rated Failure load(kN) Weight (kg)
C D M R H
UL-12 34 16 20 25 81 70  
UL-16 34 18 20 25 81 100  
UL-20 34 20 22 30 90 120  
UL-22 34 22 24 35 100 160  
UL-26 34 26 27 40 110 210  
UL-30 34 30 30 47 115 250  
UL-34 36 34 30 53 120 320  

 

Hot Product

News